VideoBar

This content is not yet available over encrypted connections.

Monday, September 16, 2013

SV8100 IP Phone Installation
Plug and Play Checklist

This document is for reference purposes only. Only Certified NEC Technicians working for an Authorized distributor with access to Tech Support should attempt to modify these settings. 
  1. First Change 10-12-09 to a static IP address on the network system. 10-12-01 should change to 0.0.0.0, 10-12-03 should be the gateway within the same subnet as the IPL in 09, and remember that these changes will require a system reset.
  2. Verify you have an IPL Card installed and Licensing for IP Phones in 5101 or 5111 under feature activation.
  3. Ensure you have extensions assigned in 11-02.
  4. Ensure your dhcp server is generating IP Addresses the same as the assignment in 10-12-09.
  5. Modify 10-16-04, 05, and 16 to the same address as 10-12-09.
  6. Verify that 10-46-01 is at Plug and Play and that 10-46-06 is port 5080. (default)
  7. Modify 84-26 IP’s to the same subnet as the IPL.
  8. These extensions will be issued in order as are in 11-02.
  9. Optionally you may enter the extension number to install a specific extension out of order by pressing HOLD, Transfer, *, #. User Name Admin, Password, 6633222. OK Press 1 for SIP User and 3 for extension number, Enter the extension you wish to install. Note this must be programmed in 11-02 as a usable extension. OK and Exit, Exit, Save. 

Thursday, September 5, 2013


NEC has released a cool cable for the Wireless Plantronics Headsets allowing a DT330 and DT730/750 terminals to answer simply by pushing your headset answer button. Instead of some massive contraption that lifts your handset while you are out of the room you can just press a button on your headset and the call will be answered for you. I know this seems like it should be pretty basic since cell phones already have this feature but it is a pretty big deal for a business phone system. Of course with the NEC you may utilize your cell phone if you wish.